Small Block Ford Motor Mount

Posted on September 20th, 2018

Archived in 0 Team321 Products, 1 Narrow Crown Vic Crossmember, 6 Ford, Motor mounts

Tags

Team321 V8 Motor mounts Small Block Ford V8

for Narrow Crown Vic Front Suspension Crossmembers

Here is a better detailed view of 3D CAD image showing the motor mount components. The associated hardware will be provided as well… but for the sake of showing how it all fits together, the hardware was hidden from the image.

The image below shows the contents of the small block ford 289, 302, 351C and 351W V8s.

Team321’s goal is to provide a variety of motor mounts that can be interchanged and easily installed on the Narrow CV crossmember.
Installing the motor mounts is straightforward… Every crossmember includes 4 pairs of 3/8″ diameter locating holes. These holes provide the locating points for the motor mounts. These 3/8″ holes are drilled in both the forward plate and the rear plate – on both the drivers’s and passenger’s side. This allows for options in positioning the engine. The brackets that mount on the engine can also be mounted in either orientation. These combinations of mounting positions allow you to choose how far forward or rearward to mount your engine.

The photos in this install sequence show the 3/8″ holes drilled in the rear plates.

Generally, motor mounts consist of a bracket that mounts to the engine block, some type of bushing and plates permanently affixed to the crossmember or truck’s frame.

Team321 has test fit these engines with rear sump oil pans and factory exhaust with no crossmember interference…

The 3/8″ holes you drilled through the crossmember plates positively locate the motor mounts… insert the provided 3/8″ mounting hardware to locate the motor mount plate.

Once you have the driver’s and passenger’s side mounts properly positioned and you’re happy with the engine’s fore / aft position on the crossmember, weld the plate to the crossmember – as indicated by the green overlay… once welded the 3/8″ hardware can be removed and the holes plug welded.

Here is a pic of the mount including the triangular gusset on the Driver’s side… In some cases this ORANGE colored plate may need to be trimmed to fit… the plates provided are raw steel, I show colors during install sequence photos to more easily identify them.

The image below shows the passenger’s side… note the brackets and triangular gussets are smaller on the passenger’s side vs. the brackets used on the driver’s side… this is due to the offset of the engine toward the passenger’s side.