Narrow Crown Vic Front Crossmember

Posted on September 5th, 2018

Archived in 0 Team321 Products, 1 Narrow Crown Vic Crossmember, 3 Front Suspension, 6 Ford, slider

Tags

crown vic, ford, front suspension, narrow crown vic, Suspension

Just over 62 inches hub-to-hub track width, adjustable coilovers, no frame mods. Click the picture to find out more.

Narrow Crown Vic Front Suspension

CLICK >>>> What’s included… what else do I need to buy? <<<< CLICK

So you’ve heard about the Crown Vic front suspension… and you would like all the good about the Crown Vic, but would like your front suspension to be 5 inches narrower… You’ve heard that everyone is using a Mustang II front suspension – but you don’t want to put a 1970s era front suspension in your classic Ford truck… and we make custom crossmembers too! The hub / hub track width is just over 62″… all we need is your frame rail dimensions and we can make you a custom crossmember.

Team321’s Narrow Crown Vic Front Crossmember is almost 5 inches narrower vs. the original Crown Vic front suspension and is the ANSWER to your needs. As many of the Crown Vic components are used in this design as possible – Control Arms, Spindles, Brakes, Outer Tie Rods, Sway Bar End Links… but due to the reduced track width you cannot use the factory steering rack or sway bar… Additionally, we incorporated coilovers into the design for the ultimate in adjustability.

If you would like to purchase Team321 products…Call (321)960-5945 or email dave@team321.com

Since this is the most often asked question, I’ll summarize it here… details below
What’s included… what else do I need to buy?

Included in the $1495 package:

Team321 has developed a narrow crossmember that retains the Crown Vic suspension geometry and utilizes the Crown Vic Control Arms, Spindles and Brakes. The track width is reduced by almost 5″ to just over 62″ – which allows the low cost Crown Vic suspension to be used in a wider selection of vehicles.

Team321 can provide everything from a base crossmember package to a complete front suspension. Call (321)960-5945 or email dave@team321.com to reserve yours. Team321 provides the crossmember, modified upper control arms, all mounting hardware and a list of all Crown Vic components required to complete a front end installation for $1495 plus shipping. Other custom packages are also available.

The 2003 – 2011 Ford Crown Victoria (Crown Vic), Mercury Grand Marquis and Lincoln Towncar front suspension has been a very popular swap for Classic Ford Pickup trucks as well as a variety of other vehicles. The Crown Vic front features heavy duty components, low cost and wide availability. The only downside of the Crown Vic front suspension is the track width… It is about 67″ wide as measured from hub / hub. While this is great for Taxis and Cop Cars, this is just to wide for older vehicles.

Add these items to the Base suspension package and sway bar above for a Complete Narrow Crown Vic Front Suspension for $3395